. China High Quality Auto Part Investment Casting fektheri le bafani ba thepa |Mingda

High Quality Auto Part Investment Casting

Tlhaloso e Khutšoanyane:

Lintlha tsa Motheo

Mokhoa oa ho Lahlela: Thermal Gravity Casting

Mokhoa: Ho Lahla boka ba Lahlehileng

Molding Technics: Khatello Casting

Kopo: Likarolo tsa Mechini

Boitsebiso: Tšepe e se nang Mokelikeli

Tokisetso ea Bokaholimo: Ho bentša

Bokhopo ba Bokahohle: Ra6.3

Mamello ea mochini: +/-0.01mm

Standard: AISI

Setifikeiti: SGS, ISO 9001:2008

Boholo: Joalo ka Setšoantšo

Boitsebiso bo Eketsehileng

Packaging: sephutheloana se tloaelehileng sa thomello

Tlhahiso: 10 Ton/Khoeli

Lebitso: Mingda

Lipalangoang: Leoatle, Naha, Moea

Sebaka sa Tšimoloho: Chaena

Setifikeiti: ISO9001

Boema-kepe: Tianjin


Lintlha tsa Sehlahisoa

LBH

Li-tag tsa Sehlahisoa

Tlhaloso ea Sehlahisoa

 

Mingda e fana ka likarolo tsa matsete a boleng bo phahameng ba ferrous le bao e seng ferrous le likarolo bakeng sa liindasteri tse fapaneng.Ts'ebetso ea matsete ke ts'ebetso e fapaneng haholo e loketseng tlhahiso e bonolo kapa e rarahaneng, e tlase kapa e phahameng haholo.Re hlahisa matsete ka lintho tse kang tšepe e sa hloekang, tšepe e sa hloekang ea duplex, titanium, carbon steel, tool steel, le alloys ea aluminium joalo-joalo. Boima ba 'mele bo tloha ho ligrama tse seng kae ho ea ho hoo e ka bang metric tonne.Re boetse re fana ka mefuta e mengata ea litšebeletso tsa bobeli tse kenyelletsang machining, ho qeta holimo, joalo-joalo.

 

Investment Casting ke Eng?

Investment casting e bolela ho thehoa ha li-ceramics ho pota-pota mohlala oa boka ho etsa khetla bakeng sa ho etsa tšepe e qhibilihisitsoeng.Hang ha mekhoa ea boka e bōpiloe, e qhibilihisoa ka har'a tsamaiso ea heke, e qoelisoa ka har'a slurry le lehlabathe ho etsa khetla e nang le lera, ebe e nkeloa sebaka ke tšepe e qhibilihisitsoeng e kang tšepe e sa hloekang, aluminium, kapa tse ling tse joalo.

Investment Castings e Etsoa Joang?

Ho lahla lichelete ho kenyelletsa ho theha mohlala oa boka ba pele, ho haha ​​​​setšoantšo ka samente le likarolo tse latellanang ho fihlela khetla e matla e pota-potile mohlala.Ka mor'a ho qhibiliha boka, tšela khauta e qhibilihisitsoeng kapa boronse ka har'a hlobo ho etsa setšoantšo se phethahetseng sa mohlala oa boka ba pele.Ts'ebetso ea matsete e fana ka ts'ebetso e tlase ea moruo, tharollo e phahameng, lintlha tse tsoetseng pele le pheletso e boreleli ha e bapisoa le karohano ea machining.Maemong a mangata, ho kenya chelete ke eona feela tsela eo karolo e ka etsoang ka eona moruong.

Linear Tolerance of Investment Casting

Tloaelo e tloaelehileng ea ho mamella matsete ka mokhoa o latelang e le molao o akaretsang: Ho fihla ho 1″ +/- .010″, bakeng sa inch e 'ngoe le e 'ngoe e eketsehileng ho fihla ho lisenthimithara tse leshome +/- .003″ ka inch.Bakeng sa litekanyo tse kholo ho feta lisenthimithara tse leshome lumella +/- .005″ ka inch.Mesebetsi ea bobeli e kang ho otlolla le ho etsa boholo e tla hlahisa mamello e haufi-ufi.

Melemo ea Investment Casting

  • Boholo: 0.1 in ho feta maoto a 3
  • Boima: ligrama tse seng kae ho isa ho metric tone e le 'ngoe
  • Bokaholimo: pheletso e boreleli haholo
  • Mamello e thata
  • Litaolo tse tšepahalang tsa ts'ebetso le ho pheta-pheta
  • Moralo le ho etsa lintho tse ngata tse fapaneng
  • Tlhahiso e sebetsang hantle
  • Lisebelisoa tse theko e tlaase
  • Mefuta-futa ea lintho tse bonahalang

 

Feme ea rona

ho lahla karolo

 

polokelo ea lisebelisoa

thepa

workshop

lebenkele la mosebetsi

 

 

 








  • E fetileng:
  • E 'ngoe:

  • Ngola molaetsa wa hao mona mme o re romele wona